In these instructions, I am going to color a photo of a little girl, to show the basic steps and concepts of how to color a B/W photo. To color your own B/W photo, the concepts are the same, and it will not be a difficult task for you.
Black and white photographs were popular in the early 19th century. It took about a half century for people to switch from B/W photos to color photos. As a result, there still exists lots of B/W photos in our lives. Even for a color photo, its color is going to fade as time goes on. However, the world cannot only be in black and white. Color can help to tell a story, and it can be used to communicate on an emotional level. As you can see from the Figure.1, the little girl looks cold and pale. However, it looks much different in Figure.2. The girl looks prettier and the scene feels warm. As a result, putting color on B/W photos is an important skill.
Technical Ability Requirements:
Coloring a photo doesn’t require a lot of skills. Even if you are a child, you are able to complete this task. However, it is better for the readers to know basic computer skills, like opening and saving files, and copying and pasting components. If you are familiar with Adobe’s graphics processor Photoshop 5 or 6, it will be very easy for you. Here I am assuming the readers have the basic computer skills like launching Photoshop software and creating a new project.
It usually takes 20 minutes for a starter to finish all the steps by following the instructions. As you get more familiar with it, it will not take longer than 10 minutes. But, the better you want your photo to be, the more time you should spend on it.
Coloring photos could bring you a lot of fun to your daily life. Just imagine if you colored your grandma’s old photo and showed it to your family, how surprised and happy they would be. When other people know you are able to use Photoshop and handle some cool skills, they will be jealous. Furthermore, this practice may lead you to a new interest in working with images.
List of Required Parts:
1. A black and white or faded photograph.
In this case, an example image is provided as shown in the first figure.
2. Adobe Photoshop CS6 or CS5 on a working computer
List Required Tools:
Because we are going to use Adobe Photoshop to do all work, it is necessary to have a copy of Adobe Photoshop. You can either buy a copy from the Adobe official website or download the trial version. A trial version gives you a limit of 30 days to experience this software. Adobe Photoshop CS6 and CS5 both work well for this instruction. If you only have an earlier version of Adobe Photoshop, like CS3 or CS4, theoretically they can work because the functions we are going to use are basic functions in Photoshop. However, if you use CS3 or CS4, the user interface would be very different from the later version. As a result, it will be a little difficult to follow the steps here and you may need to find those corresponding functions by yourself.
Here is the link to the official website:
The system requirements of Adobe Photoshop CS6 are as following:
• Intel® Pentium® 4 or AMD Athlon® 64 processor
• Microsoft® Windows® XP with Service Pack 3 or Microsoft Windows 7 with Service Pack 1. Adobe® Creative Suite® 5.5 and CS6 applications also support Windows 8. See the CS6 FAQ for more information about Windows 8 support.*
• 1 GB of RAM
• 1 GB of available hard-disk space for installation; additional free space required during installation (cannot install on removable flash storage devices)
• 1024 x 768 display (1280 x 800 recommended) with 16-bit color and 512 MB (1 GB recommended) of VRAM
• OpenGL 2.0–capable system
• DVD-ROM drive
• This software doesn’t operate without activation. Broadband Internet connection and registration are required for software activation, validation of subscriptions, and access to online services. Phone activation is not available.
You can get more information for system requirements from the official website:
OK, Let’s Start our work!
Step 1: Launch Photoshop
Step 2: Drag the B/W Photo Into Photoshop.
After dragging in the image, you should see a little girl lying on a bed playing with a bottle of perfume as is shown in the figure. As you can see, the picture looks boring and not so vivid.
So far, you have made a good start. Let’s go a little bit further.
Step 3: Convert the Image Mode to CMYK Color and Click OK to Confirm Conversion.
You will be given a Confirmation message as shown in the second figure. Just click “OK”.
The CMYK color model in Adobe Photoshop refers to the four-color printing process, in which cyan, magenta, yellow and black inks are mixed to generate a range of colors. By modifying the intensity of these colors, we are able to create any color that we can use to color the photos.
For more information about CMYK, you can view the following link.
Step 4: Press Ctrl + J to Make a Copy of the Original Photo.
You will see a new layer is created on the “Layers” panel as shown in the figure.
Step 5: Take a Snapshot of the Current Layer by Pressing “Alt” + Clicking the Camera Icon in the History Panel.
If your “History” window does not show up, go to the menu “Window” => “History”.
You will get a confirmation dialog window like in the second figure. Select “Merge Layers” from the drop-down window and click OK.
A snapshot is part of the history palette. It is used to record the state of the document at a point in time. You’ll want to make a snapshot before you make major changes which you might not be sure about keeping so that you can go back to the snapshot of the .psd file at the point you “recorded” it.
Step 6: Switch to “Channels” Panel and Select “Cyan” Channel.
The photo will appear brighter as in the second figure.
Step 7: Go to Image => Adjustments => Brightness/Contrast to Set Up Brightness and Contrast.
“Bright/Contrast” window will show up like in the first figure. Adjust “Brightness” to 85 and “Contrast” to 25.
Then if you select “CMYK” in “Channels” panel, The photo should look like the third figure.
By doing this step, we created a color that we will use to tint little girls skin and skirt, which means you have completed a big process. Keep it up!
Step 8: Take Snapshot Using the Same Method Described in Step 5.
Step 9: Click Color/ Balance in the “Adjustments” Panel and Set Parameters.
Change “Cyan” to 100, “Magenta” to -100 and “Yellow” to 20. As shown in the third figure, the picture should be in pink. We are going to use this color to tint the background of the photo and the tips of the little girl.
Step 10: 10. Take a Snapshot As Described in Step 5.
Step 11: Open Color/Balance Window Again and Set New Parameters.
Change “Cyan” to -80, “Magenta” to 85 and “Yellow” to -95 and the picture should be like the second figure. We are going to use this color to tint the girl’s hair later.
Step 12: Take a Snapshot As Described in Step 5.
Step 13: Click the CheckBox Before “Snapshot 2” and Select “Snapshot 3”.
You will see a little brush appear in the checkbox. This little brush will allow you to use “Snapshot 2” as a source to draw on “Snapshot 3”. It basically means you can use Snapshot2’s setting to color part of the “Snapshot 3”
Step 14: Use Brush to Tint the Little Girl’ Skin.
When tinting, you can set up the style of the brush in the top brush panel. You are able to set the size, the opacity, and other properties of the brush, as shown in the second figure. Choose an appropriate brush when tinting. It may take a few time for starters to successfully separate the background and the edge of the girl’s body. However, in the history panel, you are able to redo any previous actions. As a result, don’t worry about making mistakes. Just keep trying and it will be fine!
Step 15: Check the Checkbox Before “Snapshot4” and Use That As a Source to Tint Little Girl’s Hair.
Step 16: Check the Checkbox Before “Snapshot3” and Use That As a Source to Tint Little Girl’s Tips and Cheeks.
Recommendation: Use a small brush, for example, size 20 and 70% Opacity, to tint girl’s tips. Use a large brush like size 100 and 50% Opacity to powder the girl’s cheek. You can also adjust the properties of the brush according to your opinion.
Step 17: Open Hue/Saturation Window to Change Some Parameters.
Change the Saturation to 30 and the color should be much deeper, as shown in the third figure.
It is kind of difficult to explain what Hue/Saturation filter does. After I looked it up online, I got the following answer.
The Hue filter lets you adjust the hue of an entire image. Hue is the color reflected from or transmitted through an object. It is measured as a location on the standard color wheel. A positive value indicates clockwise rotation, a negative value counter-clockwise rotation. Values range from -180 to +180.
The Saturation filter, sometimes called chroma, deals with the strength or purity of a color. Saturation represents the amount of gray in proportion to the hue. Values range from -100 (percentage of desaturation, duller colors) to +100 (percentage of saturation increase).
Once you have reached this part, you are almost done! Let’s export our image file from Photoshop.
Step 18: Save the Picture to Your Disk.
Go to File => Save As
Choose the place you want to save the file to. Then in the drop-down list of “Format”, select the type of file you would like it to be. Finally, click “Save” and your hot fresh color photo is just coming out.
Step 19: Congratulations! You Have Finished Coloring This Black and White Photo!
congratulations! You have finished coloring the black and white photo, successfully made the little cute girl looks more lively lovable. You are free to share it with others! It looks so much different from the original black and white photo even only three colors are used.
The light becomes brighter and the eyes of a little girl are shining. Even the smell of perfume seems to spread through the air. Colors make the world better.
Although it is an easy task, it should give you a basic concept of how to use Adobe Photoshop to color a photo. As time goes on, Photoshop is getting better and better. It keeps offering new functions to the public by updating new versions. In the future, I am sure that there will be more convenient functions coming out for people to color black and white photos.
Step 20: Trouble Shooting
From some readers’ feedback, I am aware that some of them have a problem with the step 7. When they tried to adjust the brightness and contrast of the “Cyan” Channel, they pressed the icon in the “Adjustments” panel and a window like the second picture showed up. After they adjusted the parameter, the picture became the same as shown in the third figure. The photo showed a lot brighter but there was no change in the color.
Explanation: The function in the “Adjustment” panel works for all the channels here. When you adjust the Brightness/Contrast through the function in the “Adjustment” panel, you are basically changing the brightness and contrast of the black and white photo rather than the Cyan Layer. Only by changing the intensity of the Channel components can we produce a new color other than black and white.
Solution: To solve this problem, just follow the instruction in step 7: Go to the menu on the top. Choose Image=>Adjustments=> Brightness/Contrast. This function only works for the current Channel.